So we put pressure sensors into the finger.

所以我们把压力传感器放进手指里。

29 small, underwater observatories, equipped with pressure sensors, seismometers and accelerometers, are installed directly on the fault-line off the coast of Osaka.

29个小型水下观测站，装备有压力传感器、地震仪和加速度计，直接安装在大阪海岸的断层线上。

It can feel things with the pressure sensors and the temperature sensors.

它可以通过压力传感器和温度传感器来感知事物。

I thought it was mechanical.Maybe a faulty pressure sensor.

我想是机器的问题 有可能是压力传感器的问题。

Isn't the pressure sensor part of the load regulator sensor?

压力传感器是不是 负载调解传感器的一部分？

I thought, why don't I put a pressure sensor on the heel of his foot?

我想，为什么我不在他的脚后跟上放一个压力传感器呢？

He said he knew for a while there was a problem with the pressure sensor.

他说他早就知道压力传感器有问题。

So, if you upgraded the LRS, wouldn't you have to replace the pressure sensor, too?

那么 如果更新负载调节系统 是不是也要同时更换压力传感器？

Because they're pressure sensors, we also have found that they play important role in regulating blood pressure, this is how you know when your bladder is full.

因为它们是传感器，我们还发现它们在调节血压方面发挥着重要作用，这就是你如何知道你的膀胱是否满了。

When these pressure sensors are pressed, the data signals go into the software system and they're also relayed to the pilot.

当按下这些压力传感器时，数据信号会进入软件系统，并且还会转发给飞行员。

Here's how the artificial neuron replicates biology: Touching the pressure sensor increases the electrical voltage between a pair of electrodes in the sensor.

以下是人工神经元如何复制生物学：触摸压力传感器会增加传感器中一对电极之间的电压。

In addition to running it over repeatedly with their car, the researchers also developed a pressure sensor from the material that they used to measure people walking, and standing, and jumping.

研究人员除了用车反复碾压它们，他们还利用该材料开发了一个压力传感器，来测量人们在行走、站立和跳跃时的压力。

That's why  we installed MEDLI2, a set of temperature and pressure sensors spread across the inside of the  heat shield that measured the extreme conditions experienced during Perseverance's descent  to Mars.

这就是我们安装 MEDLI2 的原因，这是一组分布在隔热罩内部的温度和压力传感器，用于测量毅力号下降到火星期间所经历的极端条件。

As a hug takes place, a barometric pressure sensor and microphone inside the artificial chest detect human touch and begin transmitting data via an Arduino Mega microcontroller board to a Robot Operating System (ROS)-based computer located in the HuggieBot 3.0's 3D-printed head.

当拥抱发生时，人工胸部内的气压传感器和麦克风检测人类触碰，并开始通过 Arduino Mega 微控制器板将数据传输到位于第三代抱抱机器人3D 打印头中的基于机器人操作系统的计算机。