1. The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.
   絮凝剂（SPAN）是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。
2. Three Yuan second grade third rubbers (EPDM) is the ethylene, the propylene and the few non-conjugate diolefin copolymer.
   三元乙丙橡胶（EPDM）是乙烯、丙烯和少量非共轭二烯烃的共聚物。
3. This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.
   介绍了常见淀粉–烯类单体接枝共聚产物各成分的分离及其表征方法。
4. The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.
   利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧烷改性丙烯酸酯共聚物的结构和性能进行了研究。
5. Structure, mechanics, electricity, calorifics, radialization and chemicalproperties are reviewed for polyperfluoroethylene-propylene and tetrafluoroethylene perfluoroalkyl vinyl ether copolymer.
   分别阐述了聚全氟乙丙烯和四氟乙烯全氟代烷基乙烯基醚共聚物的结构和力学热学、辐射、化学性能。
6. Cleavable block copolymers could be cleaved into separate homopolymers under external stimuli (such as heat, light or agents).
   这种聚合物在外部刺激下（如热、光、特殊试剂等）可以发生解离，从而变为两段均聚物。
7. Block copolymers have rich phase behavior,and in the bulk they can microphase-separate to form spheral,cylindrical,bi-continuous or layered structure.
   嵌段共聚物有着丰富的相行为,在本体中会发生微相分离形成球形、柱形、双连续形和层状结构。
8. The performance of fluorescent-labeled copolymers contained pyrenyl has been studied by means of fluorescent spectrum and static evaluation test.
   通过荧光光谱法和静态阻垢法研究了含芘基团的荧光标记聚合物的性能,并进行了评价。
9. Some of the matrix have been aminated after the chlorome thylation of the copolymer giving an anion exchange resin.
   部分共聚物经氯甲基化及季铵化后,制得强碱型阴离子交换树脂。
10. The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.
    应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物的结晶性能。
11. The micell of block copolymer conjugates releases drugs followed the rule of first order equation and had no burst effect.
    键合物胶束体外释药遵从一级动力学，不存在突释现象。
12. In this study, the epoxidation of styrene-isoprene-styr en e triblock copolymers (SIS) by an in situ generated peracid method was discussed .
    利用过甲酸对热塑弹性体SIS进行环氧化改性,合成了环氧化SIS(ESIS)。
13. The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.
    通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。
14. PASP-PEG block structure copolymer,comb shaped PASP-PEG block structure copolymer,aspartic acid and glycine,glutamic acid or propalanine copolymer are prepared.
    还可以对聚天冬氨酸的侧链进行改性,引入烷基或烯烃基、反应活性高的氨基酸酯、磺酸基等功能性基团,使其得到更广泛的应用。
15. This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.
    本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱模剂的效果。
16. The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.
    合成过程中少量己内酰胺的加入,在不明显降低接枝物接枝率的情况下可以明显改善接枝物的熔体粘度,提高了接枝物的流动性能。

声明：以上例句、词性分类均由互联网资源自动生成，未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。