1. This is the shaft of a steam engine.
   这是一个蒸汽机主轴。
2. Claudia felt a shaft of pain shoot through her chest.
   克劳迪娅感到一阵疼痛直穿胸部。
3. The auxiliary shaft topsoil adopted ordinary construction and drainages in hygrometric well.
   屯留煤矿副井井筒表土段采用普通法施工,利用井外降水井疏干降水。
4. Unclamp the shaft from the vise and slide off the top bearing.
   松开老虎钳上的轴，将顶部轴承移出。
5. Once the ventilator shaft became blocked, the warehouse quickly filled with fumes.
   通风管一旦堵塞, 仓库很快就充满了烟雾。
6. With the balance shaft, improved vibratility.
   带平衡轴，发动机运行平稳，震动小。
7. He was wounded by a shaft.
   他被箭击中受伤。
8. A piston links to a drive shaft by means of a connecting rod.
   活塞通过连杆与驱动轴相连。
9. The fifth is assigned to crack shaft (with the doline in the same seam).
   五是地缝配竖井（天坑与地缝相通）。
10. It's more automatable and easier to repair shafts using laser overlaying welding technology.
    数控编程等手段的运用大大提高了工作效率 ,也降低了现场操作的难度。
11. An arrow consists of a shaft with head (point), nock, fletching and, if desired, cresting.
    一支箭包括有箭头的箭杆、箭尾、羽片，亦可加上箭饰。
12. Unbolt the shaft coupling bolts.
    拧开联轴器螺栓。
13. Axially mounted circlips for shafts.
    Sprin retaining rings.
14. Parts of upper transverse arm shaft, front torsion bar cannular seat, shift plate, shift lever etc.
    部分上横臂轴、扭杆前套管，变速平台、变速杆等零件。
15. However,the point of setscrew may cause damage to the shaft and may be difficult to remove.
    这种方式固定及拆卸方便，而且不会造成轴新的损坏。是一种很常用的固定方式。
16. It is very important to measure and control the position of bearing hole when machining canular forked shaft.
    在叉头套加工过程中,轴承孔位置误差的测量和控制是十分重要。
17. Through to introduce equipments of vertical shaft the cautery ,compendiary introduce insufficiency of electricity-arc spray-paint to prevent cauterization.
    通过对竖井井筒装备的腐蚀情况和电弧喷涂长效防腐技术不足的了解,建议采用玻璃钢复合材料井筒装备来解决井筒装备的腐蚀问题。
18. The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.
    摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。
19. Based on the method to design the 3-D knottiness gimbale transmission shaft,the torsion vibration is reducde,and the syntony is also avoided.
    按此法设计计算三维空间多节万向传动轴可减轻系统扭振及避免共振。
20. The technical measures and structure,applied principles of blastproof of ventilation shaft at excavating face,specific operational method and prospective effect are described.
    介绍了掘进工作面防炮崩风筒的主要技术措施及技术结构、应用原理、采用这项技术的具体操作方法及达到的预期效果。

声明：以上例句、词性分类均由互联网资源自动生成，未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。