The surface morphology and mechanical properties were researched respectively by AFM and Nano-Indentor.

分别用原子力显微镜和纳米压入仪研究薄膜的表面形态和机械性能。

Tests show that the re-dispersible emulsoid powder can remarkably improve mechanical property and durability of mortar.

试验证明,可再分散乳胶粉对砂浆的力学性能和耐久性能都有显著的改善。

Cast nylon modified with laurolactam was prepared by activated anionic copolymerization under the adiabatic condition.Its mechanical properties were studied.

在绝热条件下通过活化阴离子共聚制备十二内酰胺改性浇铸尼龙,对其力学性能进行了研究。

The effects of different amount of water and pisolite on the workability and mechanical properties of pisolite grouting material (PGM) were studied.

摘要以配制豆石型灌浆料时的加水量和所掺豆石量为研究参数，研究上述参数对豆石型灌浆料工作性能和力学指标的影响。

The mechanical property and thermal stability of cured epoxy resin were closely related to the chemical structure of hydrogenated terpinene maleic anhydride.

氢化萜烯马来酸酐的化学结构与固化物的机械强度及热稳定性密切相关。

Testing study is made on the basic mechanical property of thenardite salt rock,which includes uniaxial compressive,indirect tensile and angle changed shear tests.

通过试验,发现无水芒硝岩盐是一种软岩,强度较低,变形较大。

Effects of master alloy of quasicrystal containing magnesium additions and solution treatment on microstructure and mechanical properties of AZ91 magnesium alloy were studied.

研究了镁基准晶中间合金和固溶处理工艺对AZ91合金显微组织和力学性能的影响。

With regards to the engineering practice of concrete gate frusta in Yangjialing Spillway, the mechanical properties of concrete gate frusta have been experimentally researched.

结合杨家岭溢洪道闸墩实际工程,对以温度控制指标为主的闸墩混凝土相关力学性能进行了试验研究。

An investigation was made on the effect of rewelding on mechanical properties of Ultra-low carbon austenitic stainless steel based on mechanical properties test and microstructure examination.

通过对反复焊接1～5次的超低碳奥氏体不锈钢力学性能的试验及金相组织的分析,研究了反复焊接对超低碳奥氏体不锈钢力学性能的影响。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。